Fujitsu PRIMERGY RX1330 M5 Upgrade And Maintenance Manual Download Page 257

Page: 257 / 413

Front panel

13.1

Safety notes

CAUTION

▶

When inserting the COP (Common Operation Panel) into the

server, ensure not to pinch or strain any connected cables.

▶

Circuit boards and soldered parts of internal options are exposed

and can be damaged by static electricity. Always discharge static

build-up (e.g. by touching a grounded object) before handling

electrostatic-sensitive devices (ESDs).

▶

Do not touch the circuitry on boards or soldered parts. Hold circuit

boards by their metallic areas or edges.

▶

For more information, see

"Important information" on page 29

13.2

Basic information

In case of a defective ambient temperature sensor, please replace Common

Operation panel (COP).

COP

The COP is mounted on the right side ear. A flat cable is used for connection to

the system board.

Front VGA (option) and front USB Type C

A front VGA module is available in the RX1330 M5 with 4x 3.5-inch HDD

subsystem and 4x or 8x 2.5-inch HDD subsystem. The front VGA module

offers a front VGA connector (option) and a front USB Type C connector.
A front VGA connector can be installed as an option in the RX1330 M5S. A

front USB Type C connector is already available.

RX1330 M5

Upgrade and Maintenance Manual

257

Summary of Contents for PRIMERGY RX1330 M5






























































































































































































































































































































































































































Search results

Summary of Contents for PRIMERGY RX1330 M5

Reviews:

Related manuals for PRIMERGY RX1330 M5

Brands by name

Popular brands

Fujitsu PRIMERGY RX1330 M5, Upgrade And Maintenance Manual

Search results

Summary of Contents for PRIMERGY RX1330 M5

Reviews:

Related manuals for PRIMERGY RX1330 M5

Brands by name

Popular brands