Fujitsu PRIMERGY RX1330 M5 Upgrade And Maintenance Manual Download Page 80

Page: 80 / 413

Resetting the boot retry counter in the BIOS

▶

Enter the BIOS.

▶

Select the

Server Mgmt

menu.

▶

Under

Boot Retry Counter

press the [+] or [-] keys to specify the maximum

number of boot attempts (0 to 7).

▶

Exit the BIOS.

Resetting the boot retry counter using iRMC S6 web interface

▶

Enter the iRMC S6 web interface.

▶

Select the

Server Management

menu.

▶

The following boot retry counter settings are available under

ASR&R

Options

▶

Under

Retry counter max

specify the maximum number of attempts to

boot the OS (0 to 7).

▶

Under

Retry counter

the current number of remaining boot attempts is

displayed. Overwrite this value with the maximum number of boot

attempts specified above in order to reset the boot retry counter.

▶

Click

Apply

for the changes to take effect.

For more information on iRMC settings, see the iRMC user guides.

5.3.6

Enabling the boot watchdog

If the boot watchdog has been disabled for firmware upgrade purposes (see

"Disabling the boot watchdog" on page 70

), it has to be re-enabled to complete

the maintenance task.
Timer settings can be configured in the BIOS or using the iRMC S6 web

interface.

Basic software procedures

Upgrade and Maintenance Manual

RX1330 M5

Summary of Contents for PRIMERGY RX1330 M5






























































































































































































































































































































































































































Search results

Summary of Contents for PRIMERGY RX1330 M5

Reviews:

Related manuals for PRIMERGY RX1330 M5

Brands by name

Popular brands

Fujitsu PRIMERGY RX1330 M5, Upgrade And Maintenance Manual

Search results

Summary of Contents for PRIMERGY RX1330 M5

Reviews:

Related manuals for PRIMERGY RX1330 M5

Brands by name

Popular brands