Fujitsu PRIMERGY H200, Manual

Page: 64 / 155

54
U41147-J-Z156-2-76
Server switches itself off Troubleshooting and tips
7.2 Server switches itself off
Server Management has detected an error
Ê
In the ServerView program, check the error list or check the ErrorLog file
using the
SCU utility
, and attempt to eliminate the error.
7.3 Screen remains blank
Monitor is switched off
Ê Switch on your monitor.
Screen has been blanked
Ê
Press any key on the keyboard.
or
Ê Deactivate screen blanking (screen saver), and enter the appropriate
password when necessary.
Brightness control is set to dark
Ê Set the brightness control to light. For detailed information, please refer to
the operating manual supplied with your monitor.
Power cable or monitor cable not connected
Ê
Switch off the monitor and the server.
Ê Check whether the power cable is properly connected to the monitor and to
the power outlet.
Ê Check whether the monitor cable is properly connected to the server and
monitor (if it is plugged in with a connector). If a separate graphics card is
installed in the server, then the monitor cable must be connected to the
graphics card.
Ê
Switch on the monitor and the server.