BX924 S4
Upgrade and Maintenance Manual
269
System board components
Figure 123: Installing the system board (B)
Ê
Secure the system board with the screw (M3 x 6 mm, C26192-Y10-C68)
(see circle).
I
Screw torque: 0.6 Nm (not applicable for the Japanese market)
Ê
Verify the settings on the new system board (jumpers and/or switch).
I
For a detailed description, please refer to section
"Onboard settings"
on page 279
.
10.5.5 Concluding steps
Ê
If applicable, reinstall the air cowls as described in section
"Handling of
memory air cowls" on page 170
.
Ê
Reinstall all remaining system board components as shown in the related
sections:
– Mezzanine cards with carrier: refer to section
"Installing mezzanine
cards" on page 134
I
Install all expansion cards into their original slots.
– TPM (if applicable): refer to section
"Installing the TPM" on page 243
Ê
Close the server blade as described in section
"Closing the server blade" on
page 56
.