Fujitsu PRIMERGY 300, Operating Manual

Page: 48 / 94

Troubleshooting and tips The screen stays blank
40
A26361-K423-Z202-3-7619
The screen stays blank
If your screen remains blank this may have the following reasons:
Monitor is switched off
Ê
Switch your monitor on.
Screen has been blanked
Ê Press any key on the keyboard.
or
Ê Deactivate screen blanking (screen saver). Entering the relevant password.
Brightness control is set to dark
Ê Set the brightness control to light. For detailed information, please refer to the
Operating Manual supplied with your monitor.
Power cable or monitor cable not connected
Ê Switch off the monitor and the server.
Ê Check whether the power cable is properly connected to the monitor and
server or to the power outlet.
Ê
Check whether the monitor cable is properly connected to the server and
monitor (if it is plugged in with a connector).
Ê
Switch on the monitor and the server.
Wrong monitor has been set
Ê Refer to the documentation for the operating system for how to set the correct
monitor, and follow the procedure accordingly.