SCSI hard disk drives
System expansions for tower server
A26361-K632-Z100-1-7619
49
Installing a SCSI hard disk drive
If a hard disk drive is to be installed in a bay in which no hard disk drive was previously installed,
then the blank insert must be removed from this bay beforehand.
2
1
1
Ê
To do this, press the two tabs at the left and right on the blank insert together (1) until the
detent is released and pull the blank insert out of the bay (2).
!
Keep the blank insert for future use. If the hard disk drive is removed again and not
replaced with a new drive, then the blank insert must be reinstalled due to cooling, the
applicable EMC regulations (regulations on electromagnetic compatibility) and fire
protection.
1
2
2
1
Ê
Push the hard disk carrier into the bay (1) as far as possible and then swing down the carrier
handle completely to enable the locking mechanism to engage (2).
