Fujitsu M3097DG, Oem Manual

Page: 66 / 202

Operation and Maintenance
5-12
5.4 Consumable
Operator needs to replace following parts. It is recommended to use abrasion counter on the operator
panel and schedule the replacement of parts. Parts to be replacement cycle are as follows.
The parts replacement procedures are described in the Operator’s Guide.
Table 5.6 Parts replacement
No Part name Part number Replacement cycle Remarks
1 Pad ASY PA03951-0021 Every 100,000 sheets or
annually *1 One per scanner
2 Pick roller PA03951-0025 Every 200,000 sheets or
annually *1 One set per scanner
(two rollers are in one
set)
*1 These replacement cycle may be shortened depending on the paper scanned and bad scanner
cleaning. When carbon-less paper is used, the replacement cycle becomes short so these parts must
be prepared
earlier than above.
Figure 5.3 Pad ASY