manualshive.com logo in svg

Fujitsu M3097DG, Oem Manual

The Fujitsu M3097DG is a reliable and high-performance OEM manual scanner. This versatile device effortlessly converts your important paper documents into digital format. Ensure seamless operation with the user manual, available for free download from our website. Experience the convenience and efficiency of managing your documents with the Fujitsu M3097DG.

Share
Download
background image

3.3  Optional image function

3-27

(5)

Black and White reverse

[A.4.7  SET WINDOW command/RIF (reverse image format)]

Black and White Reverse turns the black part of the image white and white part of the image
black. This effect is similar to the negative/positive image from camera.

 

Table 3.17  Parameter of Black and White Reverse

Parameter

Value

Effect

Default

OFF

X’00’

Black and White Reverse OFF

ON

X’80’

Black and White Reverse ON

OFF

 

3.3.3

Sub-Window

[A.4.8  SET SUBWINDOW command]

In the Main Window specified in section 3.2.1, muximum four small portions on each front and back
side of the document can be clipped as Sub-Window. In each Sub Window, the deferent scanning
methods which is shown in Fig 3.2 can be specified.

NOTICE 1: IF the area specified for any sub window does not fit in the area of the main window,

the portion of the area outside the main window area is ignored. Only the portion where
the main and sub window overlap (shown hatched) is processed.

NOTICE 2:

 

If sub-windows in a main window overlap with each other as a result of the values
ULX, ULY

, W and L , the scanner returns the error.

Summary of Contents for M3097DG











































































































































































































Reviews:

No comments

Related manuals for M3097DG

Kodak ScanMate i940M User Manual preview
ScanMate i940M
Brand: Kodak Pages: 57
HOKUYO AUTOMATIC UAM-05LP User Manual preview
UAM-05LP
Brand: HOKUYO AUTOMATIC Pages: 155
Canon ScanFront 400 Instructions Manual preview
ScanFront 400
Brand: Canon Pages: 206
Blackmagicdesign cintel Installation And Operation Manual preview
cintel
Brand: Blackmagicdesign Pages: 1074
Ambir DS485 User Manual preview
DS485
Brand: Ambir Pages: 12
Shining 3D EinScan Pro User Manual preview
EinScan Pro
Brand: Shining 3D Pages: 124
LXE 8650 User Manual preview
8650
Brand: LXE Pages: 308
Dymo CardScan IC Quick Start Manual preview
CardScan IC
Brand: Dymo Pages: 7
Dymo CardScan Quick Start Manual preview
CardScan
Brand: Dymo Pages: 9
IRIScan Anywhere Wifi User Manual preview
Anywhere Wifi
Brand: IRIScan Pages: 12
Dahua DHI-ASM202 User Manual preview
DHI-ASM202
Brand: Dahua Pages: 14
Kodak 3000 DV Plus User Manual preview
3000 DV Plus
Brand: Kodak Pages: 78
NCR 7872 Series Installation And Owner'S Manual preview
7872 Series
Brand: NCR Pages: 62
Veho Renovo Series User Manual preview
Renovo Series
Brand: Veho Pages: 26
Velleman EXTREME 250 Manual preview
EXTREME 250
Brand: Velleman Pages: 23
Canon 500F - CanoScan LiDE Quick Manual preview
500F - CanoScan LiDE
Brand: Canon Pages: 2
Panasonic KV-S3105C Specifications preview
KV-S3105C
Brand: Panasonic Pages: 2
UMAX Technologies PowerLook 1000 Specifications preview
PowerLook 1000
Brand: UMAX Technologies Pages: 1

Brands by name

Popular brands

Load more brands