manualshive.com logo in svg

Fujitsu M3097DG, Oem Manual

The Fujitsu M3097DG is a reliable and high-performance OEM manual scanner. This versatile device effortlessly converts your important paper documents into digital format. Ensure seamless operation with the user manual, available for free download from our website. Experience the convenience and efficiency of managing your documents with the Fujitsu M3097DG.

Share
Download
background image

A.4  Commands

Appendix A-51

(2)

Window data:  DATA OUT phase (initiator 

→

 target)

Window data specifies the details of a window.  Window data contains a head and one or more
window descriptor block.  Each window descriptor block specifies the attributes of a window (size,
position, scan mode, etc.).

If a target receives the SET WINDOW command when it already has window data, the target
discards all of the current window data and validates the newly received data.

a.

Header

Window data (header) is shown in the following illustration.

(a)

Window descriptor block length:  Bytes 6 and 7

Specifies the length in bytes of a window descriptor block.  Each block has the same
length.  The allowable range of length is between 40 and 248 bytes.  For a length
outside this range, this scanner returns the following error information:

•

Status:

B’00001’ (CHECK CONDITION)

•

Sense key:

X’5’ (ILLEGAL REQUEST)

b.

Window descriptor block

Window parameter data (window descriptor block) is shown in the following illustration.

Note:

Front-side window data or back-side window data is specified by Window identifier.
This scanner can use both front-side and back-side window data.  If the scanner uses front-
side and back-side window data at a time, those window data must be set by one SET
WINDOW command.

7

Byte 0

5
6

(Reserved)

7

6

5

4

3

2

1

0

Window descriptor block length

(MSB)

(LSB)

Summary of Contents for M3097DG











































































































































































































Reviews:

No comments

Related manuals for M3097DG

Kodak 2400 DV Plus User Manual preview
2400 DV Plus
Brand: Kodak Pages: 74
I.R.I.S. IRISPEN EXECUTIVE 6-MAC Manual preview
IRISPEN EXECUTIVE 6-MAC
Brand: I.R.I.S. Pages: 58
Image Access WideTEK 25-600 Setup Manual preview
WideTEK 25-600
Brand: Image Access Pages: 101
Emerson Rosemount 5708 3D Solids Scanner DeltaV Series Manual Supplement preview
Rosemount 5708 3D Solids Scanner DeltaV Series
Brand: Emerson Pages: 32
Emerson Rosemount 5708 Reference Manual preview
Rosemount 5708
Brand: Emerson Pages: 204
ION FILM 2 SD PLUS Quick Start Manual preview
FILM 2 SD PLUS
Brand: ION Pages: 60
Shining 3D FreeScan UE User Manual preview
FreeScan UE
Brand: Shining 3D Pages: 51
Element P303BT User Manual preview
P303BT
Brand: Element Pages: 53
Plustek SmartOffice SN8016U Quick Manual preview
SmartOffice SN8016U
Brand: Plustek Pages: 2
Plustek PSD300 User Manual preview
PSD300
Brand: Plustek Pages: 34
Plustek SecureScan X-Cube User Manual preview
SecureScan X-Cube
Brand: Plustek Pages: 39
Jireh CX0344 User Manual preview
CX0344
Brand: Jireh Pages: 189
Jireh NAVIC User Manual preview
NAVIC
Brand: Jireh Pages: 197
Plustek V1.2 User Manual preview
V1.2
Brand: Plustek Pages: 44
Portronics SCANNY 4 Manual preview
SCANNY 4
Brand: Portronics Pages: 2
Radio Shack PRO-93 Owner'S Manual preview
PRO-93
Brand: Radio Shack Pages: 84
Zeutschel OS16000 Manual preview
OS16000
Brand: Zeutschel Pages: 2
Datalogic HandScanner MR Quick Start Manual preview
HandScanner MR
Brand: Datalogic Pages: 3

Brands by name

Popular brands

Load more brands