84
1
Press the CD eject button.
The tray springs out a little.
2
Pull out the tray gently.
CD eject button
Tray
Critical Points
If the tray will not comes out
– If Windows is shut down, turn your computer back on and press the CD eject button again.
– If the computer is turned off, turn it on, and then press the CD eject button.
You can press the eject button at any time, even when the
on the operating status
indicator LED blinks.
3
Place a disc on the tray while holding the tray with a hand.
Fit the hole in the disc on the stopper at the center of the tray with the title-printed face up, and
push it down until it clicks into place. Failure to do so may make it impossible to play or eject the
CD.
Tray
Projection
Clove Sec 2 (081-87)
17/10/02, 4:38 PM
84
