Fujitsu Lifebook P1510, User Manual

Page: 48 / 218

38
replicator (See figure 4-5 on page 34 for
location) .
1. Remove the cover from the port
opening, if present.
2. Align the connector with the port
opening.
3. Push the connector into the port until it
is seated.
4. Tighten the two hold-down screws,
located on each side of the connector.
When an external monitor is
plugged in, pressing the [Fn] +
[F10] keys allows you to change
your selection of where to send
your display video. Each time
you press the key combination,
you will step to the next choice,
starting with the built-in display
panel only, moving to the
external monitor only, finally
moving to both the built-in
display panel and an external
monitor.
When an external monitor is
plugged in, pressing the
LifeBook Application Panel
Secondary Function buttons (Fn
+ Screen Rotation Button) also
allows you to change your
selection of where to send your
display video.
P Series.book Page 38 Thursday, August 4, 2005 11:02 AM