manualshive.com logo in svg

Fujitsu Lifebook L440, User Manual

The Fujitsu Lifebook L440 is a versatile laptop designed for productivity and mobility. With its sleek design and powerful performance, this device is perfect for users on the go. Enhance your experience with the free User Manual available for download on our website, ensuring you make the most of your new Lifebook L440.

Share
Download
background image

S e c t i o n   S i x

162

Restoring Your Pre-installed Software
from CD-ROM

The Recovery CD-Rom enables restoration of
your notebook disk drive contents as they were
originally shipped from the factory. Most often
this is necessary if files or software programs
(only those files/programs that came pre-
installed) become corrupted or accidentally
erased.

You have two options available when perform-
ing recovery:

1. Recover Hard Drive without Format

This choice replaces all the original factory
installed files and program structures with-
out eliminating your data files. You will have
to re-install any software that was not includ-
ed with the computer when you bought it
(but your data will be intact as long as the
installation of the additional programs is 
performed in the same manner).

2. Format and Recover Hard Drive

WARNING: This choice removes all the informa-
tion on the hard disk. If you choose this option,
you will lose any software you have installed and
any other files you created since you setup your
computer. You will have to re-install any software
that was not included with the computer when
you bought it.

Device Drivers, Utilities and 
”Read-Me“ File(s)

The Recovery CD also includes a section for
providing device driver files/directories and
specific LifeBook model utilities that give  you
additional flexibility and functionality for using
your Fujitsu notebook.

This section of the CDis only available if your
notebook is already functioning from either
your hard drive boot/operating system or as a
result of using a bootable floppy disk that is
configured to recognized the CD-ROM drive.

P O I N T

It is recommended that you ”back-up“
all data files prior to performing either of
the recovery options.

C A U T I O N

User data and user installed software CAN
NOT be recovered from the Recovery CD.

P O I N T

Do not boot your notebook from the
CD-ROM drive as is done for restoring
your pre-installed software.

P O I N T

Look for and open files with the exten-
sions ”.DOC” and ”.TXT”.

Summary of Contents for Lifebook L440








































































































































































































Reviews:

No comments

Related manuals for Lifebook L440

Panasonic Toughbook CF-18 Series Supplementary Instructions Manual preview
Toughbook CF-18 Series
Brand: Panasonic Pages: 32
Gateway MX6243m Guía De Configuración preview
MX6243m
Brand: Gateway Pages: 2
Gateway MX6211b User Manual preview
MX6211b
Brand: Gateway Pages: 188
Gateway NV-52 Guía De Referencia preview
NV-52
Brand: Gateway Pages: 150
Clevo M540J Service Manual preview
M540J
Brand: Clevo Pages: 104
TONGFANG AX201 User Manual preview
AX201
Brand: TONGFANG Pages: 44
UMAX Technologies UMM220V14 User Manual preview
UMM220V14
Brand: UMAX Technologies Pages: 50
UMAX Technologies Visionbook 13WA PLUS Manual preview
Visionbook 13WA PLUS
Brand: UMAX Technologies Pages: 34
ThinkPad Edge E530 Hardware Maintenance Manual preview
Edge E530
Brand: ThinkPad Pages: 118
Toshiba Satellite L735-S3370 Specifications preview
Satellite L735-S3370
Brand: Toshiba Pages: 4
Toshiba Satellite L740-BT4N11 Specifications preview
Satellite L740-BT4N11
Brand: Toshiba Pages: 4
Toshiba Satellite L735-S3220 Specifications preview
Satellite L735-S3220
Brand: Toshiba Pages: 4
Toshiba Satellite L735-S3210 Specifications preview
Satellite L735-S3210
Brand: Toshiba Pages: 4
Toshiba Satellite L735-S3212 Specifications preview
Satellite L735-S3212
Brand: Toshiba Pages: 4
Toshiba Satellite L730-ST4N01 Specifications preview
Satellite L730-ST4N01
Brand: Toshiba Pages: 4
Toshiba Satellite L730-ST5N01 Specifications preview
Satellite L730-ST5N01
Brand: Toshiba Pages: 4
Toshiba Satellite L630 Series Specifications preview
Satellite L630 Series
Brand: Toshiba Pages: 4
Toshiba Satellite L55DT-A Specifications preview
Satellite L55DT-A
Brand: Toshiba Pages: 4

Brands by name

Popular brands

Load more brands