background image

U s i n g   Y o u r   L i f e B o o k   L   S e r i e s

L i f e B o o k   L   S e r i e s   f r o m   F u j i t s u

41

Figure 3-10 CD-ROM/DVD Drive

SUPERDISK

TM

120 DRIVE

The optional modular SuperDisk 120 drive is a
floppy disk drive that can read and w rite both
120MB SuperDisks and standard 1.44MB and
720KB floppy disks. It takes the place of a flop-
py drive and offers greater removable media
storage capabilities.

The SuperDisk 120 drive works very much like
a regular floppy disk drive in your LifeBook L
Series.Please refer to the Floppy Disk Drive
section for usage and care information.

CD-ROM DRIVE

The modular CD-ROM drive is a 20x maxi-
mum reader that can only be used in the Multi-
function Bay of the Det ach a bl e Bay.

DVD DRIVE

The optional modular DVD Drive is a 1.5-
speed maximum reader and takes the place of
the CD-ROM drive in the Detachable Bay. It
works very much like a CD-ROM drive in that
it can read CD-ROMs as well as DVDs. It can
also play Audio CDs.

Figure 3-9 SuperDisk 120 Drive

Figure 3-11 Loading the CD-ROM/DVD Tray

Summary of Contents for Lifebook L440








































































































































































































Reviews: