manualshive.com logo in svg

Fujitsu Lifebook L440, User Manual

The Fujitsu Lifebook L440 is a versatile laptop designed for productivity and mobility. With its sleek design and powerful performance, this device is perfect for users on the go. Enhance your experience with the free User Manual available for download on our website, ensuring you make the most of your new Lifebook L440.

Share
Download
background image

C o n f i g u r i n g   Y o u r   L i f e B o o k   L   S e r i e s

L i f e B o o k   L   S e r i e s   f r o m   F u j i t s u

101

Menu Field

Options

Default

Description

Power Savings:

Customized; Maximum 

[Customized]

Sets the power savings parameters to a factory installed

Performance; Maximum 

combination of parameters, a custom set of parameters set by you

Power Savings, Disabled.

or no power saving features.

Hard Disk Timeout:

30 seconds to

[Off]

Sets the length of time that the hard drive can be inactive before

20 minutes; Off.

your notebook automatically turns off the power to the hard drive
controller and drive motor. If you choose a factory installed
combination of parameters this field will display the setting. If
you choose to customize the parameters you will be able to set
this yourself. The options available vary from Off, which has no
inactivity shutoff, to 20 minutes.

Video Timeout:

2 minutes to

[Off]

Sets the length of time without any user input device activity

20 minutes; Off.

before the display is turned off. If you choose a factory combination
of parameters,this field will display the setting. If you choose to
customize the parameters, you will be able to set this yourself.Off
has no inactivity shutoff.

Table 4-14 Fields, Options and Defaults for the Power Menu.

P O I N T

If you purchased an L-Series notebook pre-loaded with the Windows NT 4.0
operating system, the default setting for Power Savings will be “Disabled”.
This setting is optimal for NT functionality with your notebook.

Summary of Contents for Lifebook L440








































































































































































































Reviews:

No comments

Related manuals for Lifebook L440

Acer Aspire V5-552 Quick Manual preview
Aspire V5-552
Brand: Acer Pages: 9
Acer TravelMate 2200 Manuel D'Utilisation preview
TravelMate 2200
Brand: Acer Pages: 106
Acer Aspire E1-731 Quick Manual preview
Aspire E1-731
Brand: Acer Pages: 9
Acer Ferrari 3000 Manual Do Utilizador preview
Ferrari 3000
Brand: Acer Pages: 102
Acer Aspire 9500 Guía Del Usuario preview
Aspire 9500
Brand: Acer Pages: 102
Acer Aspire Timeline 4810TZ Service Manual preview
Aspire Timeline 4810TZ
Brand: Acer Pages: 148
Acer Predator Triton 500 Manual preview
Predator Triton 500
Brand: Acer Pages: 9
Compaq Presario 1905 Maintenance & Service Manual preview
Presario 1905
Brand: Compaq Pages: 177
Acer eMachines E720 Series Service Manual preview
eMachines E720 Series
Brand: Acer Pages: 214
Acer eMachines E730 Series Quick Manual preview
eMachines E730 Series
Brand: Acer Pages: 314
Acer Extensa 15 EX215 User Manual preview
Extensa 15 EX215
Brand: Acer Pages: 81
bto x-book 17cl46 User Manual preview
x-book 17cl46
Brand: bto Pages: 308
Toshiba M6-ST3412 Installation Manual preview
M6-ST3412
Brand: Toshiba Pages: 38
Toshiba Advanced Port Replicator III User Manual preview
Advanced Port Replicator III
Brand: Toshiba Pages: 48
Toshiba Hi-Speed Port Replicator III User Manual preview
Hi-Speed Port Replicator III
Brand: Toshiba Pages: 63
Packard Bell EasyNote MZ Series Disassembly Manual preview
EasyNote MZ Series
Brand: Packard Bell Pages: 18
Packard Bell EasyNote LJ61 Service Manual preview
EasyNote LJ61
Brand: Packard Bell Pages: 202
Sony VAIO VPCEG33FXL Specifications preview
VAIO VPCEG33FXL
Brand: Sony Pages: 2

Brands by name

Popular brands

Load more brands