background image

75

S p e c i f i c a t i o n s

Power

6-cell Lithium ion battery pack

Battery Charger

Auto/Airline Adapter

AC Adapter

Storage

External CD-ROM drive

PC Cards

SmartCard holder

Additional Accessories

Wireless Keyboard and Mouse

Presentation Audio system

TeleAdapt 16' TeleCord

IBM Modem Saver

Notebook Guardian Lock

Stylus Five Pack

Carrying Cases

Duo Carrying Case

Diplomat Carrying Case

PRE-INSTALLED SOFTWARE

Your LifeBook comes with pre-installed software for 
playing audio and video files of various formats. The 
software configuration installed is dependent upon the 
operating system that is pre-installed on your system. In 
addition, there is file transfer software, virus protection 
software and Power Management software. 

LEARNING ABOUT YOUR
APPLICATION SOFTWARE

Tutorials

All operating systems and most application software 
have tutorials built-into them upon installation. We 
highly recommend that you step through the tutorial 
before you use an application.

Manuals

Included with your LifeBook notebook you will find 
manuals for your operating system and other pre-
installed software. Manuals that are not included are 
available online through the help system of the software. 
We recommend that you review these manuals for 
general information on the use of these applications.

Microsoft Windows 

Depending upon the configuration of your notebook, 
Microsoft Windows 2000 Professional, Microsoft 
Windows XP Home, or Microsoft Windows XP 
Professional is installed as your operating system.

Drive Image Special Edition (DISE) by PowerQuest

DISE by PowerQuest provides a way to restore your 
computer if you experience a hard disk crash or other 
system failure. DISE is used to restore the factory image 
and restore the system to its original state. 

BatteryAid by Fujitsu Limited (Windows 2000 
Professional only)

BatteryAid allows you to control the display brightness 
of your notebook in order to maximize battery life. (See 
your BatteryAid online help for more information on the 
correct way to use this program)

Fujitsu HotKey Utility (Windows XP only)

Utility for displaying the brightness and volume levels 
on your LifeBook screen.

Microsoft Internet Explorer

Internet Explorer is installed as your default internet 
browser.

Netscape 7.0

Browser suite, including integrated E-mail accounts, 
instant messaging, address book, search, and other tools 
and plug-ins.

Adobe

 

Reader

The Adobe Reader, located in the Service and Support 
Software folder, allows you to view, navigate, and print 
PDF files from across all major computing platforms. 

LifeBook Security/Application Panel Software

Your LifeBook notebook is pre-installed with software 
utilities that let you operate and configure your Life-
Book Application Panel. These utilities are found under 
the Start menu, under Programs, then under LifeBook 
Application panel. They include a CD Player, Applica-
tion Panel Setup, Application Panel Guide, Activate 
Panel and Deactivate Panel.

Intel SpeedStep

(This utility is a separate utility for Windows 2000 
systems; it is built into the Windows XP operating system.)

Intel SpeedStep allows your Lifebook notebook to 
operate in dual mode by default. When connected to 
AC source, the system operates in Maximum 
Performance mode. When powered by battery, the 
system switches to Battery Optimized mode to 
conserve battery life. SpeedStep software is 
automatically loaded when you start your system and 
appears on the system tray as one of the two flags. A 
checker flag indicates that the system is set for 
Maximum Performance mode. A blue flag with a 
green center square indicates that the system is set for 
Battery Optimized mode. You can change the setting 
or disable the software by double-clicking the flag icon 
and changing the settings in the Intel SpeedStep 
Technology window.

Since your notebook does not support the 
CPU Clock control, the option is not active 
within the Power Control menu of 
BatteryAid.

B Series.book  Page 75  Friday, April 23, 2004  11:41 AM

Summary of Contents for Lifebook B3020




















































































































Reviews: