Fujitsu i-4990C Page 95 Operator'S Manual Download

Page: 95 / 120

6-43

In <<SETUP MODE>> initial screen, press

ENTER

The <<SETUP MODE>> menu screen (Paper
Length Check) appears.

Press

repeatedly until “Setup Mode

Lock” appears in the lower line of the menu
screen.

Press

ENTER

The option select screen appears with the
current setting OFF blinking (blinking indicates
“changeable”).

Press

The displayed option changes (ON blinks).

Press

ENTER

to save the change.

The LCD returns to the <<SETUP MODE>>
menu screen (Setup Mode Lock).

To quit the <<SETUP MODE>>, turn off the
power.

<<SETUP MODE>>

Paper Length Check

<<SETUP MODE>>

Setup Mode Lock

To cancel the setup mode lock state, turn off the power and turn on the power while pressing the

button to enter the setup mode. In the setup mode, select the Setup Mode Lock function

and set the option to OFF.

The following is an example of operation when you use this function.

Setup Mode Lock

OFF

<<SETUP MODE>>

Setup Mode Lock

15C6.P65

01.2.17, 5:47 PM

Summary of Contents for i-4990C

























































































































Search results

Summary of Contents for i-4990C

Reviews:

Related manuals for i-4990C

Brands by name

Popular brands

Fujitsu i-4990C, Operator'S Manual

Search results

Summary of Contents for i-4990C

Reviews:

Related manuals for i-4990C

Brands by name

Popular brands