Fujitsu i-4990C, Operator'S Manual

Page: 117 / 120

IN-3
S
T
Pre-pick 6-35
Product ID 6-34
Reading parameter 6-15
Ream weightr of paper 4-2
Scanner 1-1
SCSI Bus width setting 6-47
SCSI ID 6-33
SCSI interface 2-5
Screen transition 3-7, 3-8, 3-9, 6-3, 6-6,
6-50
Setup, Browse, and Test Modes 6-1
Setup items
Background changeover 6-21
Buzzer 6-27
Buzzer volume 6-28
Consumable alarm mode 6-25
Consumable counter 6-22
Consumable counter reset 6-24
Double feed check 6-8
Drop-out color 6-20
Function key 6-40
Hopper height 6-16
Interface board slot 6-46
IPC-3 mode 6-13
LCD contrast 6-29
Language 6-44
Manual feed timeout 6-37
Paper feed retry 6-39
Paper length check 6-7
Paper pick retry 6-38
Paper separation level 6-17
Paper thickness setup 6-10
Pick start time 6-36
Picking speed 6-30
Pre-pick 6-35
Product-ID 6-34
SCSI Bus width setting 6-47
SCSI-ID 6-33
Setup mode lock 6-42
Skew check 6-12
TP_IF baud rate 6-31
White follower mode 6-45
Setup mode 3-7, 6-1
Setup mode, contents of 6-4
Setup mode lock 6-42
SF2 did not detect leading edge of paper
6-17
Side cover 1-3
Skew check 6-12
Specifications 5-1
Stacker 1-3
Stacker extension 1-3
Stacker guide 1-3
START key 6-41
Satus display, transition of 3-9
Stop lever 1-1, 1-3
Temporary errors 1-7
Test items
Device life 6-55
Offline feed test 6-52
Options 6-54
Test mode 3-7, 6-49
Test mode, contents of 6-51
TP_IF baud rate 6-31
Transition of
screens in setup mode 6-6
operator panel status and display 3-9
Turning
the Power On 3-1
the main line switch off 2-4
Units 1-2
Units and Assemblies 1-2
R
U
17INX.P65 01.2.17, 5:48 PM 3