Fujitsu i-4990C Page 92 Operator'S Manual Download

Page: 92 / 120

6-40

Function key

This function allocates setup functions to

, and

buttons. You can allocate

up to three setup functions.

NOTE

• You cannot use this function when the setup mode is brought by pressing

in the Ready

status.

• You cannot allocate the following functions: TP_IF Baud Rate, SCSI ID, Product ID, Setup Mode

Lock, and Function Key itself.

Press

ENTER

The option select screen appears with the
current setting 1 (for Step) blinking (blinking
indicates “changeable”).

Press

The current count setting 4 blinks.

Press

The displayed option changes (1, 2, 3, 4, 5, 6,
7).

When the desired value appears, press

ENTER

to save the change.

The LCD returns to the <<SETUP MODE>>
menu screen (Paper Feed retry).

Press

CANCEL

two times.

The LCD returns to the Ready screen.

Paper Feed retry

Step: 1 Times: 4

Paper Feed retry

Step: 1 Times: 7

<<SETUP MODE>>

Paper Feed retry

Ready

Paper Feed retry

Step: 1 Times: 4

15C6.P65

01.2.17, 5:47 PM

Summary of Contents for i-4990C

























































































































Search results

Summary of Contents for i-4990C

Reviews:

Related manuals for i-4990C

Brands by name

Popular brands

Fujitsu i-4990C, Operator'S Manual

Search results

Summary of Contents for i-4990C

Reviews:

Related manuals for i-4990C

Brands by name

Popular brands