System expansions
Installing and removing a board
You can install various boards (e.g. a graphics card) in your device.
Before using a graphics card for the
fi
rst time, please pay attention to
the notes in chapter
"Important notes on preparing your FUTRO S920 for
use with an external graphics card", Page 10
.
The installation and removal procedure is the same for all types of
board. A PCIe board is shown below.
Installing the board
Board,
You can only install boards with a maximum length of 170 mm.
►
Enter the required settings for the board.
►
Open the casing (see
"Opening the casing", Page 31
).
2
1
►
Insert the riser card in its slot (1).
►
Undo the screw (1) and remove the rear slot cover plate of the slot (2).
Fujitsu
55