System expansions
2
2
1
►
Secure the hard disk with the screw (1).
►
Connect the cables to the hard disk (2).
►
Close the housing (see
"Closing the casing", Page 59
).
Make sure that the cables are not trapped between the casing and the components.
Installing and removing a Power over Ethernet
module (optional)
You can install an additional Power over Ethernet module in your device.
Before using the module for the
fi
rst time, please pay attention to the notes in
chapter
"Important notes on preparing your FUTRO S720/S920 or ESPRIMO A525-L
for use via the Power over Ethernet module", Page 10
.
If you are supplying the system with power via the PoE module, ensure that
no additional power supply (mains adapter) is connected.
Fujitsu
51