System expansions
Removing the SmartCard reader
SmartCardreader
►
Open the casing (see
"Opening the casing", Page 31
).
►
If a PCIe board is installed, you must remove the cross piece and PCIe
board (see
"Removing the board", Page 57
).
1
3
3
4
2
►
Disconnect the cable from the SmartCard reader (1) and from the mainboard (2).
►
Undo the screws (3).
►
Lift the SmartCard reader from the carrier (4).
►
When required, reinstall the cross piece and the PCIe board (see
"Installing the board", Page 55
).
►
Close the casing (see
"Closing the casing", Page 59
).
Ensure that cables are not trapped between the casing and the components.
36
Fujitsu