System expansions
3
2
2
1
4
►
Place the SmartCard reader on the carrier with the component side facing
downwards, in the direction of the arrow (1).
►
Fasten the SmartCard reader onto the carrier with the screws (2).
►
Connect the cable to the SmartCard reader (3) and to the connector on the mainboard (4).
►
When required, reinstall the cross piece and the PCIe board (see
"Installing the board", Page 55
).
►
Close the casing (see
"Closing the casing", Page 59
).
Make sure that the cables are not trapped between the casing and the components.
Fujitsu
35