Fujitsu CELSIUS H920 Operating Manual Download

Page: 84 / 100

Troubleshooting and tips

The printer does not print

Printerdoesnotprint

Cause

Troubleshooting

The printer is not switched on.

►

Make sure that the printer is switched
on and ready for operation (refer to the
documentation supplied with the printer).

The printer is not connected correctly.

►

Check that the data cable connecting
the notebook to the printer is properly
connected.

The printer driver is faulty or not correctly
installed, or it is the wrong printer driver.

►

Check that the data cable connecting
the notebook to the printer is properly
connected.

►

Check whether the correct printer driver is
loaded (refer to the printer documentation).

The radio connection to a network does not work

Theradioconnectiontoanetwork does notwork

Cause

Troubleshooting

The wireless component is disabled.

►

Switch the radio component on (see

"Switching the wireless components on and
off", Page 43

The wireless component is enabled. Despite
this, the wireless connection to a network does
not work.

►

Check whether the radio connection is
switched on via the software.

►

Further information on using the radio
component can be found in the help

les.

Acoustic warnings

Acoustic errormessages

Errors

Cause

Troubleshooting

A beep sounds every few seconds.

The battery is almost

at.

►

Charge the battery.

Fujitsu Technology Solutions

Summary of Contents for CELSIUS H920





































































































Search results

Summary of Contents for CELSIUS H920

Reviews:

Related manuals for CELSIUS H920

Brands by name

Popular brands

Fujitsu CELSIUS H920, Operating Manual

Search results

Summary of Contents for CELSIUS H920

Reviews:

Related manuals for CELSIUS H920

Brands by name

Popular brands