Fujitsu CELSIUS H920 Operating Manual Download

Page: 22 / 100

Working with the notebook

Notebook,operation

Notebook

This chapter describes the basics for operating your notebook. Please read the chapter
entitled

"Connecting external devices", Page 58

for instructions on how to connect

devices such as a mouse and a printer to the notebook.

Please refer to the notes in

"Important notes", Page 12

Status indicators

Statusindicatorpanel

The status indicators provide information about the status of the power supply,
the drives and the keyboard functions.

Indicator

Description
Power-on indicator

Power-onindicator

Indicator

•

The indicator is illuminated: The notebook is switched on.

•

The indicator

ashes (1 second on/1 second off): The notebook is in power

saving mode.

•

The indicator is not illuminated: The notebook is switched off or is in
Save-to-Disk mode.

Fujitsu Technology Solutions

Summary of Contents for CELSIUS H920





































































































Search results

Summary of Contents for CELSIUS H920

Reviews:

Related manuals for CELSIUS H920

Brands by name

Popular brands

Fujitsu CELSIUS H920, Operating Manual

Search results

Summary of Contents for CELSIUS H920

Reviews:

Related manuals for CELSIUS H920

Brands by name

Popular brands