Fujitsu CELSIUS H920 Operating Manual Download

Page: 47 / 100

Working with the notebook

Wireless LAN / Bluetooth (device-dependent) /
UMTS / LTE (device-dependent)

The installation of a radio components not approved by Fujitsu Technology
Solutions will invalidate the certi

cations issued for this device.

Switching the wireless components on and off

Before switching on your device for the

rst time, the on/off switch for

radio components must be in the "ON" position.

►

Slide the ON/OFF switch into the "ON"
position to activate the radio components.

WirelessLAN

Bluetooth

►

Slide the ON/OFF switch to the
"OFF" position to deactivate the
radio components.

If you switch off the radio components, the wireless LAN antenna and (when present)
the Bluetooth and UMTS / LTE modules will also be switched off.

You can enable and disable the installed radio components individually
using the

WirelessSelector

programme

You can also deactivate the wireless components individually in the

BIOS Setup

For this to occur, you must either not have assigned a supervisor password or if a
supervisor password has been assigned, you must know this password.

Pay attention to the additional safety notes for devices with radio components
provided in the "Safety/Regulations" manual.

Details on using Wireless LAN can be found in the online help system
included in the Wireless LAN software.

You can

nd more information on how to use Bluetooth on the CD you

received with your Bluetooth software.

You can obtain more information on UMTS / LTE from your service provider.

Fujitsu Technology Solutions

Summary of Contents for CELSIUS H920





































































































Search results

Summary of Contents for CELSIUS H920

Reviews:

Related manuals for CELSIUS H920

Brands by name

Popular brands

Fujitsu CELSIUS H920, Operating Manual

Search results

Summary of Contents for CELSIUS H920

Reviews:

Related manuals for CELSIUS H920

Brands by name

Popular brands