Fujitsu CELSIUS H920 Operating Manual Download

Page: 81 / 100

Troubleshooting and tips

Restoring the hard disk contents under Windows

Harddisk:

Operatingsystem,restoring

You can use the "Windows Recovery CD" (optionally available) and the "Drivers & Utilities
CD/DVD" to reinstall the operating system.

The instructions are provided on the case of the Recovery CD.

During the reinstall process your personal

les and any installed programs

will be deleted. We advise you to backup your

les to an external hard

drive, or CD / DVD disk before you start.

►

Switch the notebook on.

The following display brie

y appears on the screen during start-up:

<ESC>Diagnostic screen <F12>Boot Menu <F2>BIOS Setup

►

When this message appears, press the function key

F12

►

Insert the "Windows Recovery CD" into the optical drive.

►

Select

CD-ROM

and press the Enter key.

►

Follow the instructions on the screen.
After the installation you must install all the drivers again. Some installed hardware
components will not be correctly supported until this has been done.

►

Insert the "Drivers & Utilities" CD/DVD into the optical drive. The CD starts automatically.

►

Click on the

Desk Update

button.

►

Select

Automatic driver installation (Express)

and click on

Start installation

►

Follow the instructions on the screen.

►

Restart your notebook when the driver installation is completed.

The notebook’s date or time is incorrect

Summertime

Time,daylightsavings

Timenotcorrect

Incorrectdate/time

Dateisincorrect

Bufferbattery,load

Cause

Troubleshooting

Time and date are incorrect.

►

With the

BIOS-Setup-Utility

, you can set the

date and time in the

main

menu.

If the time and date are still set incorrectly after
switching on the notebook.

►

Please contact your sales outlet or our
Hotline/Service Desk.

The notebook’s LCD screen remains blank

LCDscreen

LCDscreenistoodark

Cause

Troubleshooting

Monitor is switched off.

►

Press a key or touch the touchpad.

External monitor or television set connected.

►

Press the key combination to switch the
screen output, see

"Key combinations",

Page 23

Fujitsu Technology Solutions

Summary of Contents for CELSIUS H920





































































































Search results

Summary of Contents for CELSIUS H920

Reviews:

Related manuals for CELSIUS H920

Brands by name

Popular brands

Fujitsu CELSIUS H920, Operating Manual

Search results

Summary of Contents for CELSIUS H920

Reviews:

Related manuals for CELSIUS H920

Brands by name

Popular brands