Fujitsu CELSIUS H920 Operating Manual Download

Page: 46 / 100

Working with the notebook

SIM card

A SIM Card (Subscriber Identity Module) is a chip card which is inserted in a mobile telephone or
notebook to enable access to a mobile radio network in conjunction with an installed UMTS module.

Follow the instructions supplied by the provider of the SIM card.

The SIM card slot is located in the battery compartment and can only
be accessed when the battery is removed.

Inserting the SIM card

►

Prepare for installation of the SIM card, see chapter

"Preparing to remove components", Page 65

►

Slide the SIM card into the slot (1)
until it is felt to engage, as shown in
the battery compartment.

►

Complete the installation, see chapter

"Finishing component removal", Page 73

Removing the SIM card

►

Prepare for removal of the SIM card, see chapter

"Preparing to remove components", Page 65

►

Press on the edge of the SIM card so that
it jumps up slightly out of the slot.

►

Pull the SIM card out of the slot in the
direction of the arrow (1).

►

Complete the removal, see chapter

"Finishing component removal", Page 73

Fujitsu Technology Solutions

Summary of Contents for CELSIUS H920





































































































Search results

Summary of Contents for CELSIUS H920

Reviews:

Related manuals for CELSIUS H920

Brands by name

Popular brands

Fujitsu CELSIUS H920, Operating Manual

Search results

Summary of Contents for CELSIUS H920

Reviews:

Related manuals for CELSIUS H920

Brands by name

Popular brands