Fujitsu CELSIUS H920, Operating Manual

Page: 55 / 100

Security functions
Protecting BIOS Setup Utility (supervisor and user password)
If you have opened these operating instructions on the screen, we recommend that
you print out the following instructions. Because you cannot call the instructions
onto the screen while you are setting up the password.
BIOS SetupUtility
You prevent unauthorised use of the BIOS Setup Utility with both the supervisor and the user
password. The supervisor password gives you access to all functions of the BIOS Setup
Utility , while the user password only provides some of the functions. You can only set a
user password if a supervisor password has already been assigned.
Please refer to the " "Settings in BIOS Setup Utility", Page 74 section for a
description of how to call up and operate the
BIOS Setup Utility
.
Setting supervisor and user password
► Start the BIOS Setup Utility and go to the Security menu.
► Select the
Set Supervisor Password
fi eld and press the Enter key.
With Enter new Password : you are asked to enter a password.
► Enter the password and press the Enter key.
Con fi rm new Password requires you to con fi rm the password.
► Enter the password again and press the Enter key.
Changes have been saved is a con fi rmation that the new password has been saved.
► To set the user password, select Set User Password and proceed exactly as
when con fi guring the supervisor password.
If you do not want to change any other settings, you can exit BIOS Setup Utility
.
► In the Exit menu, select the option Save Changes & Exit .
► Select
Yes
and press the Enter key.
Password Supervisorpassword Userpassword
The notebook will be rebooted and the new password will come into effect. It will now be
necessary to
fi rst enter your supervisor or user password in order to open the
BIOS Setup Utility
.
Please note that the user password only provides access to a few of the BIOS settings.
Changing the supervisor or user password
You can only change the supervisor password when you have logged into the
BIOS Setup Utility with the supervisor password.
Password Supervisorpassword Userpassword
► Call the BIOS Setup Utility and go to the Security menu.
► When changing the password, proceed exactly as for password assignment.
Fujitsu Technology Solutions 51