Fujitsu BroadOne GX4000 R3.0 Series, User Manual

Page: 82 / 100

Fujitsu and Fujitsu Customer Use Only Commissioning Test
BroadOne GX40000 Manual (R3.0) issue 1.03
3-1
3 Commissioning Test
3.1 Overview
This chapter explains the antenna orientation and how to do the commission
test for the GX4000 link. Main topics covered are;

Preparation

Antenna alignment guideline

Antenna alignment procedure

Continuity tests after antenna alignment

Configuration setting (Provisioning)
3.2 Preparation
The following safety precautions must be observed when installing, using, or
maintaining radio equipment. These precautions ensure the safety of all
personnel and the protection of radio equipment.
Station and Hop Test Items
Table 3.2.1 Antenna Alignment & Commissioning Test Items
Task Name Manual Reference Notes
Preparation
DC Power Supply ON Section 3.3
Open WebLT Section 3.4
Antenna Alignment
TX power setting Section 3.5
Antenna alignment Section 3.5
Continuity Test
Signal continuity Tests Section 3.6
Performance monitoring Section 3.6
Note:
In case that test result is out of specification, please refer to Chapter 4
Maintenance and trouble shooting.
Measuring Instrument Required
The typical measuring instrument required to carry out the commissioning
tests are as follows
;--

Multi-meter for power supply voltage and antenna alignment test

PC for configuration setting & performance monitoring