En-15
■
State of indicator lamps
: The instruction is relating to the WLAN control.
Lighting pattern:
Blinking,
Any state
State
Causes and solutions
See
page
Automatic defrosting operation
⇒
Please wait until finishing the
defrosting (maximum of 15 minutes).
13
Filter indicator
⇒
Clean the air filter and reset the filter
sign.
12
Error code display
⇒
Consult authorized service personnel.
-
Timer setting error because of Auto
restart
⇒
Reset the clock and timer settings.
13
Test run operation (for authorized
personnel only)
⇒
Press to quit the test run.
3
The power to the wireless router is
not on.
-
⇒
Check that the power to the wireless
router is on.
There is a possibility that the WLAN
adapter is not properly connected
to the wireless router.
7
⇒
Disconnect the power supply to the
air conditioner (via breaker or plug),
and then re-connect.
The software of the WLAN adapter
is being updated.
-
During the air conditioner registration
(pairing of WLAN adapter)
9
Restricted function
13
■
Manual Auto operation and Filter indicator
reset
You can operate the air conditioner with
on the
indoor unit.
Status
Time to keep pressing
Mode or operation
In operation More than 3 seconds
Stop
Stopping
2 seconds or less
Filter indicator reset
More than 3 seconds and
less than 10 seconds
Auto
More than 10 seconds
(Only for servicing.*
1)
)
Forced cooling
*1) To stop the forced cooling, press this button or
on the remote
controller.
(3 times)
(Fast)
(Slow)
9387858068-01_OM.indb 15
07-Oct-20 14:00:45
