Fujitsu AB*G30LRTE series, Service Instruction

Page: 65 / 71

03-02
( Factory setting)
Setting Description Function Number Setting Value
4-way
3-way
22
00
01
1-4. Outlet directions (For AU type)
Select the setting values in the table below for using a 3-way outlet.
( Factory setting)
Setting Description Function Number Setting Value
Standard
Upward
23
00
01
1-5. Vertical direction adjusting scope (For AU type)
To prevent from draft, we recommend using "upward mode".
( Factory setting)
Setting Description Function Number Setting Value
Standard
Lower control
Slightly warmer control
Warmer control
31
00
01
02
03
1-7. Setting the Heater room temperature correction
Depending on the installed environment, the room temperature sensor may require a correction.
The settings may be changed as shown in the table below.
1-6. Setting the Cooler room temperature correction
( Factory setting)
Setting Description Function Number Setting Value
Standard
Slightly lower control
Lower control
Warmer control
30
00
01
02
03
Depending on the installed environment, the room temperature sensor may require a correction.
The settings may be selected as shown in the table below.
1-8. Setting the Auto restart
Enable or disable automatic system restart after a power outage.
( Factory setting)
Setting Description Function Number Setting Value
Yes
No
40
00
01
Auto restart is an emergency function such as for power failure etc.
Do not start and stop the indoor unit by this function in normal operation.
Be sure to operate by the control unit, or external input device.