56
A26361-K879-Z102-3-7619
Operating and Indicator Elements
Preparation for use and operation
Operating elements
Indicators on the front panel
Key lock
To prevent access to the drives, the server can be locked.
ON/OFF button
When the system is switched OFF, it can be switched ON by
pressing the ON/OFF button. When the system is operating,
pressing the ON/OFF button will switch OFF the system.
I
The ON/OFF button does not disconnect the server from
the mains voltage. To completely disconnect it from the
mains voltage, remove the power plug from the socket.
NMI
NMI button
I
Please, do not use it! Using only from service.
reset
Reset button
Pressing the reset button reboots the system.
ID
ID button
Pressing the ID button lights up the ID LEDs (blue) on the front
and on the rear of the server. The two ID LEDs are synchronized.
Power-on/standby indicator (green/orange)
lights green when the server is switched ON and ready for operation.
lights orange when the server is connected to the mains voltage, but
it is switched OFF (standby mode).
Hard disk drive busy indicator (green)
An internal SCSI drive (HDD or magnetic tape) is being accessed.
