A26361-K879-Z102-3-7619
37
Hardware Installation
Installing/Removing the Rack Model
Figure 11: Mounting the telescopic rail into the DataCenter Rack
Ê
Using the supplied Allen key (No. 5) secure the end of the telescopic rail
without assembly bracket with two screws M5 (1) in the rack at the front left
support upright.
Please note that the guide nubs of the telescopic rail next to the spring nuts
must fit into the holes in the support upright.
Ê
Secure the end of the telescopic rail assembled with the bracket (HL) with
two screws M4 (2) on the support bracket in the rack.
Note with the fact that the two plugwashers are inserted in the appropriate
openings of the support bracket (see figure 8 on page 33).
Ê
Adjust if necessary the length of the telescopic rail by using the oblong holes
of the assembly bracket (HL).
Ê
Secure the second telescopic with two screws M5 each in the rack at the
right support uprights.
Please note that the guide nubs of the telescopic rail next to the spring nuts
must fit into the holes in the support uprights.
