A26361-K879-Z102-3-7619
29
Hardware Installation
Installing/Removing the Rack Model
Requirements of the Rack
The rack systems of the Fujitsu Siemens Computers GmbH (PRIMECENTER
Rack; DataCenter Rack and 19-Inch (Classic) Rack) support fully the instal-
lation of the PRIMERGY server systems. The installation into the at present
usual rack systems of different foreign manufacturers (3rd-Party Rack) is
supported to large part.
To accommodate the ventilation concept and ensure proper ventilation of the
components in the rack, any unused areas must be closed using dummy covers.
The power is supplied via the socket strips available in the rack.
The main features of the rack systems of the Fujitsu Siemens Computers GmbH
are:
PRIMECENTER Rack
–
In connection with so-called assembly brackets frontally bolted telescopic
rails or sliding rails.
Two of these assembly brackets and/or the sliding rails are provided with a
linear alignment possibility to ensure also an adjustment to different rack
depths.
–
Extended cable management within the lateral rack area.
DataCenter Rack
–
Directly laterally bolted telescopic rails or sliding rails (except within the rear
left area where a support bracket is used).
–
Extended cable management within the lateral rack area.
19-Inch (Classic) Rack
–
Directly laterally bolted telescopic rails or sliding rails.
–
Cable management by using an articulated cable carrier.
The mounting of the rails in the different racks is described in the next sections.
The mounting of the cable management is described in detail in the Technical
Manual to the respective rack.
