62S_Rev3
42
Basic Operation
Storing splicing results
Splicing results is stored in memory.
Storing results automatically
The splice result is automatically stored in memory when RESET is pressed upon
completion of the splice at the [Finish] screen or when the wind-protector is opened upon
completion of the splice at the [Finish] screen.
Once a certain comment is recorded, the same comment is recorded into subsequent
splice results. To change comments, see the next paragraph.
How to input Mode Title/Comment/Password
Character list below is displayed by selecting Mode Title / Comments / Password.
1.
Move the cursor by pressing Up/Down Arrow key, MENU key, and press ENT key
to input the selected character. If an incorrect character is inputted, move the
cursor to [BS] and press ENT key to highlight the character, and then input the
proper character over it.
2.
Move cursor to [ENTER] on right side and press ENT key on completion of inputting
characters.
3.
In the case of Password input, the next screen image is displayed if the correct
password is inputted. If the input password is incorrect, the previous screen image is
displayed.
After the 2000th result is stored, 2001st splice result is written over 1st result.
CAPS Characters
SMALL Characters
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com
