62S_Rev3
6
General information
Introduction
This fusion splicer 62S is a fusion splicer which can connect a single optical fiber.
Moreover, a new function was added and made the 62S splicer much improved in versatility.
In order to master 62S, please read this instruction manual.
Splice mode
The 62S has not only standard splice modes, but also
automatic modes, AUTO mode. The AUTO mode consists
of [SM AUTO], [MM AUTO], [NZ AUTO], [DS AUTO] mode.
When using AUTO mode, the automatic arc calibration
function is enabled.
The special modes consist of [SM-SM] for SMF (ITU-T G652), [NZ-NZ] for NZDSF (ITU-T
G655), [DS-DS] for DSF (ITU-T G653) and [MM-MM] for MMF (ITU-T G651). This mode
requires executing [Arc Calibration] before splicing.
Automatic arc calibration function
This function calibrates the arc power at every splice. When the automatic arc calibration
function is enabled, performing the [Arc calibration] function before a splice operation is not
necessary. The automatic arc calibration function works in AUTO modes only. It doesn’t
work in the standard splice modes. When using those modes, performing [Arc calibration]
before splicing is strongly recommended.
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com
