62S_Rev3
16
Basic Operation
In the case of use only with splicer
Use in a location which does not have vibration, a shock, etc. at the time of performing fusion
splice work.
In work [at the unstable place where a main part is shaky], the possibility of
damage from a fall becomes high.
Sleeve Loader
（
62S only
）
Sleeve loader for holding the Protection sleeve during Splicing.
It is possible that there are dust, rain water, etc. depending on work environment, and
garbage, moisture, etc. mix to the protection sleeve under splice.
Putting a protection sleeve on the ground etc. directly by using a sleeve loader is lost, and
mixing of garbage or moisture can be prevented.
Moreover, since the protection sleeve was held near the connection position, workability
also became good.
Dusty environment
Environment of rain water
The right-and-left side of equipment can attach to both.
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com
