FujiFilm IS Pro, Owner'S Manual

Page: 99 / 244

99
Advanced Features —
Photography
Preset White Balance
Use this function to set the correct white balance for a light
source. You can also use this function to achieve a
desired special effect.
Z
Setting the preset white balance in the [SHOOTING
MENU]
Z
When the exposure is not measured correctly
OVER: The subject is too bright. Use a negative (–)
exposure compensation value and set the white
balance again.
UNDER: The subject is too dark. Use a positive (+)
exposure compensation value and set the white
balance again.
Continued
Q
A
Set the focus-mode selector to M (manual).
B
Select one of the
]
PRESET CUSTOM items under
[
T
WHITE BALANCE] in the [SHOOTING MENU].
See “Setting the [SHOOTING MENU]” (
➝
p.108).
C
Press
n
or
o
to select [NEW WB].
D
Press
q
.
PRESET CUSTOM 1 PRESET CUSTOM 1
CHOOSE COLOR TEMP. CHOOSE COLOR TEMP.
FINE FINE
FLASH
FLASH
SHADE
SHADE
WHITE BALANCE WHITE BALANCE
FLUORESCENT LAMP-5 FLUORESCENT LAMP-5
OK OK
NEW WB NEW WB
CANCEL CANCEL
NEW WB NEW WB
PRESET CUSTOM 1 PRESET CUSTOM 1
E
Hold up a sheet of white paper, reflectivity
of 18% grey card, etc., under the target
light source. Be sure the white balance
reference object fills the 8-mm (0.31-in.)
reference circle for center-weighted
metering in the viewfinder (
➝
p.19). Then
press the shutter button.
F
If the exposure is measured correctly,
“COMPLETED!” appears on the LCD
monitor.
Check that the white balance reference
object fills the
area on the LCD
monitor. Press MENU/OK to confirm the
setting.
COMPLETED! COMPLETED!
SET CANCEL SET CANCEL