FujiFilm IS Pro Owner'S Manual Download Page 132

Page: 132 / 244

132

PLAYBACK MENU

Protecting the images
(

PROTECT)

Use this mode to prevent frames (files) from being
accidentally erased. Your camera calls images “frames”.

To protect or unprotect only the selected frame (file):

FRAME SET / RESET

Press

to select the protecting/

unprotecting frame (file).

Press MENU/OK to protect/unprotect the
currently displayed frame (file).
Unprotected: protecting frame (file)
Protected: unprotecting frame (file)

To protect another frame (file), repeat steps

and

When protecting frames (files) is completed, press DISP/
BACK.

PROTECT OK?

YES

CANCEL

Unprotected

UNPROTECT OK?

YES

CANCEL

Protected (

displayed)

SET ALL

Press MENU/OK to protect all the frames
(files).

RESET ALL

Press MENU/OK to unprotect all the frames
(files).

SET ALL OK?

IT MAY TAKE A WHILE

YES

CANCEL

RESET ALL OK?

IT MAY TAKE A WHILE

YES

CANCEL

Setting the menu (

➝

p.126)

Summary of Contents for IS Pro





















































































































































































































































Search results

Summary of Contents for IS Pro

Reviews:

Related manuals for IS Pro

Brands by name

Popular brands

FujiFilm IS Pro, Owner'S Manual

Search results

Summary of Contents for IS Pro

Reviews:

Related manuals for IS Pro

Brands by name

Popular brands