FujiFilm IS Pro, Owner'S Manual

Page: 225 / 244

225
*
1
CCD-RAW is a format specific to the IS Pro. The enclosed "FinePixViewer" software or the optional Hyper-Utility software
"HS-V3" is required to interpret images.
*
2
Images shot in high-sensitivity photography may appear coarse and may also be affected by noise such as white dots.
*
3
Images shot with long exposures may appear coarse and may also be affected by noise such as white dots.
Input/Output Terminal
Video output NTSC/PAL-type
Digital interface USB 2.0 High-Speed, MTP/PTP (Picture Transfer Protocol)
DC input socket AC Power Adapter AC-135VN (sold separately)
Power Supply and Others
Power supply Use one of the following:
Rechargeable Battery NP-150 (included)
AC Power Adapter AC-135VN (sold separately)
Guide to the number of
available frames for battery
operation
According to the CIPA (Camera & Imaging Products Association) standard procedure for measuring
digital still camera battery consumption (extract):
Using the battery supplied with the camera and AF50mm/F1.4D lens. The storage media should be
CompactFlash card.
Pictures should be taken at a temperature of +23°C (+73°F), shoot every 30 seconds with the AF-moved
for each shot, the flash used at full power every second shot and the camera turned off and then on again
once every 10 shots.
• Note: Because the number of available shots varies depending on the level of charge in the battery, the
figures shown here for the number of available shots using the battery is not guaranteed.
The number of available shots will also decline at low temperatures.
Camera dimensions (W/H/D) 147 mm × 113 mm × 74 mm/5.8 in. × 4.4 in. × 2.9 in. (not including accessories and attachments)
Camera mass (weight) Approx. 830 g/29.3 oz. (not including accessories, battery and memory card)
Operating Conditions
Temperature: 0°C to +40°C (+32°F to +104°F)
80% humidity or less (no condensation)
Battery Type With LCD monitor OFF
NP-150 (1500 mAh) Approx.400 frames
Continued
Q