manualshive.com logo in svg

FujiFilm IS Pro, Owner'S Manual

The FujiFilm IS Pro is a professional-grade digital camera designed for professional photographers seeking exceptional image quality. Capture stunning photos with its advanced features and unique infrared capabilities. Enhance your photography skills by accessing the comprehensive Owner's Manual available for free download on manualshive.com.

Share
Download
background image

239

Do not change, heat or unduly twist or 
pull the connection cord and do not 
place heavy objects on the connection 
cord.

These actions could damage the cord and 
cause a fire or electric shock.
• If the cord is damaged, contact your 

FUJIFILM dealer.

Do not place the camera on an unstable 
surface.

This can cause the camera to fall or tip 
over and cause injury.

Never attempt to take pictures while in 
motion.

Do not use the camera while you are 
walking or driving a vehicle.
This can result in you falling down or being 
involved in a traffic accident.

Do not touch any metal parts of the 
camera during a thunderstorm.

This can cause an electric shock due to 
induced current from the lightning 
discharge.

Do not use the battery except as 
specified.

Load the battery as aligned with the 
indicator.

 WARNING

Do not heat, change or take apart the 
battery.
Do not drop or subject the battery to 
impacts.
Do not store the battery with metallic 
products.
Do not use chargers other than the 
specified model to charge the battery.

Any of these actions can cause the battery 
to burst or leak and cause fire or injury as 
a result.

Use only the battery or AC power 
adapter specified for use with this 
camera.
Do not use voltages other than the 
power supply voltage shown.

The use of other power sources can cause 
a fire.

If the battery leaks and fluid gets in 
contact with your eyes, skin or 
clothing. Flush the affected area with 
clean water and seek medical attention 
or call an emergency number right 
away.

Do not use the charger to charge 
battery other than those specified here.

The charger is designed for the 
rechargeable battery NP-150. Using the 
charger to charge conventional batteries 
or other types of rechargeable battery can 
cause the battery to leak fluid, overheat or 
burst.

Continued 

Q

 WARNING

Summary of Contents for IS Pro





















































































































































































































































Reviews:

No comments

Related manuals for IS Pro

Sakar 98379 User Manual preview
98379
Brand: Sakar Pages: 31
Z-CAM K1 Pro User Manual preview
K1 Pro
Brand: Z-CAM Pages: 16
Tesla SMART CAMERA PIR BATTERY User Manual preview
SMART CAMERA PIR BATTERY
Brand: Tesla Pages: 6
ZKTeco ZKIR532 Setup Manual preview
ZKIR532
Brand: ZKTeco Pages: 3
GeoVision GV-BL220D Specifications preview
GV-BL220D
Brand: GeoVision Pages: 3
Genius P313 Read This First Manual preview
P313
Brand: Genius Pages: 40
Golbong 4901-18 Operation And Installation Manua preview
4901-18
Brand: Golbong Pages: 41
Lilin UFG1122 Start Manual preview
UFG1122
Brand: Lilin Pages: 27
Wansview NCB541W User Manual preview
NCB541W
Brand: Wansview Pages: 22
Godox Mini Pioneer 120 Instruction Manual preview
Mini Pioneer 120
Brand: Godox Pages: 4
IC Realtime ICIP-D2360 Instruction Manual preview
ICIP-D2360
Brand: IC Realtime Pages: 17
Interlink electronics RemotePoint VP4300 User Manual preview
RemotePoint VP4300
Brand: Interlink electronics Pages: 42
Velleman CAMCOLBUL18 User Manual preview
CAMCOLBUL18
Brand: Velleman Pages: 21
Canon 8800F - CanoScan - Flatbed Scanner Quick Start Manual preview
8800F - CanoScan - Flatbed Scanner
Brand: Canon Pages: 270
Canon Power Shot G15 Getting Started preview
Power Shot G15
Brand: Canon Pages: 68
Canon PowerShot A100 User Manual preview
PowerShot A100
Brand: Canon Pages: 120
Canon Pocket Guide G2 Pocket Manual preview
Pocket Guide G2
Brand: Canon Pages: 15
Canon Pixma Series Supplementary Manual preview
Pixma Series
Brand: Canon Pages: 6

Brands by name

Popular brands

Load more brands