FujiFilm IS Pro, Owner'S Manual

Page: 156 / 244

156
U
SET UP
Z
ISO auto control indicator
When [ON] is selected, the control panel and viewfinder
show
ISO-AUTO . When sensitivity is altered from the
value selected by the user, these indicators blink and the
altered value is shown in the viewfinder (the indicators do
not blink and the altered value is not shown if flash is
used).
• When a flash is used, foreground subjects may be
underexposed in photos taken at slow shutter speeds,
in daylight, or against a bright background. Choose a
flash mode other than slow sync or select mode
or
and choose a larger aperture.
• Note that because sensitivity is only altered from the
value selected by the user when the limits for aperture
and shutter speed are exceeded, flexible program
(mode
) has no effect on aperture or shutter speed
when the ISO-AUTO indicators are blinking.
• Images may become grainy at higher ISO settings.
• If the camera automatically adjusted the ISO sensitivity
for the image, ISO sensitivity in the photo information is
displayed in red during playback.
Choose whether adjustments to shutter speed, aperture,
and bracketing are made in increments equivalent to 1/3
EV ([1/3 EV STEP], the default option), 1/2 EV ([1/2 EV
STEP]), or 1 EV ([1 EV STEP]).
Choose whether adjustments to exposure compensation
and exposure fine tuning are made in increments
equivalent to 1/3 EV ([1/3 EV STEP], the default option),
1/2 EV ([1/2 EV STEP]), or 1 EV ([1 EV STEP]).
EV CONTROL STEPS
EXP COMP/FINE TUNE
How to use the SET UP menu (
➝
p.138)