FujiFilm IS Pro Owner'S Manual Download Page 127

Page: 127 / 244

127

Advanced

Features —

Playback

PLAYBACK MENU

Setting the menu (

➝

p.126)

Erasing the images (

ERASE)

Use this mode to erase unnecessary images to have
ample free space on the memory card.

MEMO

To erase another frame (file), repeat above steps.
When erasing frames (files) is completed, press DISP/
BACK.

CAUTION

Pressing MENU/OK repeatedly erases consecutive
frames (files). Take care not to erase a frame (file) by
mistake.

MEMO

Protected frames (files) cannot be erased. Unprotect the
frames (files) before erasing them (

➝

p.132).

CAUTION

Erased frames (files) cannot be recovered. Back up
important frames (files) onto your PC or another media.

Erasing one frame at a time (FRAME)

Press

to select the erasing frame

(file).

Press MENU/OK to erase the currently
displayed frame (file).

ERASE OK?

YES

CANCEL

Erasing all frames (ALL FRAMES)

Press MENU/OK to erase all the frames
(files).

Press DISP/BACK to cancel
erasing of all the frames
(files). Some frames (files) not
already erased may be saved.

ERASE ALL OK?

IT MAY TAKE A WHILE

YES

CANCEL

Summary of Contents for IS Pro





















































































































































































































































Search results

Summary of Contents for IS Pro

Reviews:

Related manuals for IS Pro

Brands by name

Popular brands

FujiFilm IS Pro, Owner'S Manual

Search results

Summary of Contents for IS Pro

Reviews:

Related manuals for IS Pro

Brands by name

Popular brands