FujiFilm IS Pro Owner'S Manual Download Page 169

Page: 169 / 244

169

Settings

To avoid mis-use, lock the functions of the command dial,
[SHOOTING MENU] and [SET UP] menu.

[LOCK SETTING]

Select [ALL FUNCTION], [SELECTED FUNCTION], or
[BASIC FUNCTION] for the [LOCK SETTING].

[FUNCTION SELECTION]

Specifies functions to be locked when [SELECTED
FUNCTION] is selected for [LOCK SETTING].

[CHANGE PASSWORD]

Change password when [LOCK SETTING] activates.

These functions can be specified by the [SELECTED
FUNCTION]

The functions to be locked by the [BASIC FUNCTION]

• All options in the [SET UP] menu (except [FUNCTION

LOCK], [FORMAT]).

• Auto bracketing
• Two-button reset

MEMO

• The following functions can be used even when

[FUNCTION LOCK] is set.
- Playback (

, )

- Release (AF-ON button, AE-L/AF-L button)

• Specify the functions using [FUNCTION SELECTION]

before setting the [SELECTED FUNCTION] under
[LOCK SETTING] (

➝

p.170).

Continued

FUNCTION LOCK

UNLOCK

Releases the lock for functions.

ALL FUNCTION

Locks the fucntions which can be
locked in [BASIC FUNCTION] and the
functions which can be specified in
[SELECTED FUNCTION].

SELECTED
FUNCTION

Locks the specified functions. To
specify the functions, use [FUNCTION
SELECTION]. The functions locked by
the [BASIC FUNCTION] will also be
locked when the [SELECTED
FUNCTION] is set.

BASIC
FUNCTION

Locks all functions except the
functions which can be specified by
the [SELECTED FUNCTION].

• FORMAT
• ERASE
• APERTURE
• SHUTTER SPEED
• EXP.COMPENSATION
• TONE/COLOR/SHARP
• D-RANGE
• COLOR SPACES
• FILM SIMULATION

• QUALITY
• WHITE BALANCE
• ISO
• NOISE REDUCTION
• EXPOSURE MODE
• FLASH COMPENSATION
• MAINTENANCE
• DATE/TIME-TIME DIF
• FILE TAG OPTIONS

How to use the SET UP menu (

➝

p.138)

Summary of Contents for IS Pro





















































































































































































































































Search results

Summary of Contents for IS Pro

Reviews:

Related manuals for IS Pro

Brands by name

Popular brands

FujiFilm IS Pro, Owner'S Manual

Search results

Summary of Contents for IS Pro

Reviews:

Related manuals for IS Pro

Brands by name

Popular brands