FujiFilm FLA-8000, Operation Manual

Page: 132 / 137

2002. Jan. Verson 3.0
130
Image Scanning Specifications
Major Specifications
Equipment dimensions (W x D x H): 850 x 730 x 480 mm (Projections not included)
Equipment weight: 110 kg
Power supply: 100 to 115 VAC +10%, single-phase, 50 or 60 Hz
200 to 230 VAC +10%, single-phase, 50 or 60 Hz
Power capacity: 3.0 A (100 V)
1.5 A (200 V)
Temperature conditions Operating 15 to 30 o C
Storage -25 to +60
o
C
Humidity conditions Operating 35 to 70% RH
(No dew condensation)
Storage No dew condensation
Noises: 56 dB max. when measured with the JEIC
Sound Level Meter (Fuji Calibration No. 8697)
at the position of 1 meter from the equipment
surface and 1.2 meters from the floor
Gerauschentwicklung: Max. 56 dB bei Messung mit dem JEIC
Gerauschpegelmesser (Fuji Kalibrierung
Nr. 8697) in einer Entfernung von 1 m
vom Gerat und einer Hohe von 1,2 m uber
dem Boden.
Major Specifications / Image Scanning Specifications
Applicable samples : Slide glass for microscopes Five pieces may be set simultaneously.
Gel Two pieces may be set simultaneously.
IP (micro-plate size) One IP may be set.
Scanning ranges : Slide 74 mm x 23 mm (per slide) x 5 pieces
Gel 51 mm x 59 mm (per gel) x 2 pieces
IP 85 mm x 127 mm
Pixel sizes : 5, 10, 20, 50, and 100
u
m (square)
(Gel: 100
u
m, IP: 10, 20, 50, and 100
u
m)
Linear speed of scanning : 200, 400 and 800 mm/sec.
Scanning time : 13 minutes or less (One mono-color slide, 400 mm/sec., 10
u
m)
Dynamic range : 4 digits or more (L5 recording)
Density gradations : 16 bits
Using the FLA-8000 in the micro-array method is allowed to licensees only in U.S.A.
Using the FLA-8000 in the micro-array method is not allowed in any countries other than U.S.A.