FujiFilm FLA-8000, Operation Manual

Page: 117 / 137

2002. Jan. Verson 3.0
115
532 laser unit has a problem and
can not continue scanning.
Please restart FLA-8000 and try.
640 laser unit has a problem and
can not continue scanning.
Please restart FLA-8000 and try.
FLA-8000 has a problem and can
not scan with the current scanning
condition.
Please change resolution or scan
mode and try again.
FLA-8000 has a problem and can
not scan with the current scanning
condition.
Please change resolution or scan
mode and try again.
FLA-8000 has a problem and can
not scan with the current scanning
condition.
Please change resolution or scan
mode and try again.
FLA-8000 has a problem and can
not scan with the current scanning
condition.
Please change resolution or scan
mode and try again.
"SHG532 stoppage error"
The optimum temperature detection results in NG.
The current exceeds the LD current upper limit.
A Peltier error bit is detected.
A thermistor error bit is detected.
No lasers are installed.
"LD stoppage error"
The optimum temperature detection results in NG.
The current exceeds the LD current upper limit.
A Peltier error bit is detected.
A thermistor error bit is detected.
No lasers are installed.
** Analog warning in startup self-diagnosis **
"5 um-400 mm/s analog adjustment error when start-
ing up"
The log amplifier could not be adjusted within the tar-
get value range.
A line interruption is failed while monitoring the inte-
gral current.
The integral current could not be adjusted within the
target value range.
A line interruption is failed while monitoring the inte-
gral voltage.
The integral voltage could not be adjusted within the
target value range.
"5-200, 10-400 or 20-800 analog adjustment error
when starting up" Ditto
"10-200 or 20-400 analog adjustment error when start-
ing up" Ditto
"20-200 analog adjustment error when starting up"
Ditto
Restart the FLA-8000 body.
If the phenomenon does
not change, on-call, or
execute self-diagnosis.
(Scanning with other la-
sers is enabled, except
special cases.)
Restart the FLA-8000 body.
If the phenomenon does
not change, on-call, or
execute self-diagnosis.
(Scanning with other la-
sers is enabled, except
special cases.)
Restart the FLA-8000 body.
If the phenomenon does
not change, on-call, or
execute self-diagnosis.
(Scanning in Scan mode
may be enabled at other
resolutions.)
Restart the FLA-8000 body.
If the phenomenon does
not change, on-call, or
execute self-diagnosis.
(Scanning in Scan mode
may be enabled at other
resolutions.)
Restart the FLA-8000 body.
If the phenomenon does
not change, on-call, or
execute self-diagnosis.
(Scanning in Scan mode
may be enabled at other
resolutions.)
Restart the FLA-8000 body.
If the phenomenon
does not change, on-
call, or execute self-di-
agnosis.
( S c a n n i n g i n S c a n
mode may be enabled
at other resolutions.)
9420H
(Warning)
9440H
(Warning)
9A01H
(Warning)
9A02H
(Warning)
9A04H
(Warning)
9A08H
(Warning)
Countermeasures according to warning and error messages