FujiFilm FinePix S3Pro, Service Manual

Page: 80 / 102

80
5. Inspection
FinePix S3Pro Service Manual
5-6. AF Checking
5-6-1. Measuring equipment and tools used for AF checking
Measuring instrument Remarks
Power supply AC adapter (eg AC-5VX), Regulated power supply
AF inspection lens of FinePix S2 Pro ZJ00654-100
AF target for inspection ZJ00626-100
X-Y stage for AF adjustment FinePixM603 and commonness: ZJ00611-100
Power cable jig Common with adjustment jig: ZJ00213-100
Scale (1000mm) Goods on the market
5-6-2. Settings for the measuring equipment and tools used for AF checking
Fluorescent
light stand Upper-level solid
chart
Center line
1234567
1234567
1234567
1234567
AF target for inspection
(Center chart)
953.5mm ± 1.0mm
Lens for AF
F mount side
Camera
Scale
Base plate
Lower-level
solid chart
X-Y stage for AF adjustment
<Step 1>
Take out the camera stand for the AF Solid chart and set the X-
Y stage for AF adjustment on the base plate.
<Step 2>
Mount the camera on the X-Y stage for AF adjustment.
<Step 3>
Remove the hexagonal bolt in the top of the AF solid chart
block and remove the upper-level solid chart.
<Step 4>
Align the AF intermediate chart surface horizontally and
vertically with the “0” Emarkings on the lower-level and upper-
level solid charts and then tighten the hexagonal bolt (long
type) provided with the AF intermediate chart.
<Step 5>
Check that there is no tilt or instability in the AF solid chart
block.
<Step 6>
Set the scale on the base plate and adjust the position so that
the distance between the AF intermediate chart and the F mount
on the camera is 953.5 ±1.0 mm.
<Step 7>
Attach the checking lens on the camera and switch the camera
on.
<Step 8>
Adjust the X-Y stage so that the center of the AF intermediate
chart appears in the AF target (center) in the viewfinder.
< Set up for AF offset adjustment >
AF solid chart