FujiFilm FinePix S3Pro, Service Manual

Page: 72 / 102

72
5. Inspection
FinePix S3Pro Service Manual
5-3. Inspection and Settings at Shipment
No.
1
2
3
4
Item
Visual check
Power switch
check
Power supply
confirmation from
DSC side to
camera
IEEE1394 device
recognition
confirmation
Flash
Photograph check
image
Mode
P Mode
P Mode
A mode
Focus “M”
mode
Preparations for adjustment
and measurement
Visual check of camera.
(1) Insert the Jig cable in
DC_JACK.
(2) Set power supply voltage.
(3) Install the lens for the
inspection.
(4) Insert the xD picture card
which can be recorded.
(5) Thing that display by which
date setting is urged
appears.
(6) Push the BACK button.
(7) Turn on “Illuminator button”
and turn off.
(1) Connect the IEEE1394
cable with PC.
(2) Stop the device connection
of PC, and pull out the
IEEE1394 cable from the
camera.
(3) Switch power OFF.
(1) Turn on the Power_on of
the main body.
(2) Change to A mode.
(3) Set to ISO sensitivity 200.
(4) Set aperture to F5.6.
(5) Set number of recorded
pixels to [6M][STD] (others
to defaults).
(6) Set as for flash
adjustment.
(7) Take photograph.
Adjustment and
measurement method
• No significant dents in body.
• Click sound of all switches,
and operation of sliders,
normal.
• No significant foreign matter,
or cloudiness, in viewfinder.
• Flash mechanism opens
and closes smoothly.
(2) 5.00+-0.5V
(5) Confirm there is no
garbage no dirt.(Top
display panel, Rear display
panel, LCD monitor)
(7) Thing which lights LED
back light of Top display
panel and Rear display
panel, and is turned off.
(1) Thing that “DSC” is
displayed in Rear display
panel, and camera is
recognized as external
drive on PC.
(2) The any error does not
appear in PC.
(3) The any “DSC” is
displayed in Rear display
panel, and camera is
recognized as external
drive on PC.
(6) See Setup for Flash
Adjustment diagram.
(7) Recorded on xD picture
card.
Measuring
instrument
Visual
PC
Visual
IEEE1394
cable
Gray chart
Measurement
point
Top display panel
LCD monitor
Rear display panel
Rear display panel