FujiFilm FinePix F30, Service Manual

Page: 64 / 111

64
4. Adjustments
FinePix F30 Service Manual
Camera
Filter (LB140)
Pattern box
Maximum 5mm
Centerline
Maximum 30mm
Maximum 40mm
4-10. [F5] : Camera Adjustment
(shutter adjustment, adjustment for reduced aperture sensitivity, ISO sensitivity adjustment, white balance adjustment, AE
adjustment, offset level adjustment, Shading adjustment)
< Setup for Camera Adjustment>
Finish the calibration of the pattern box before Camera adjustment.
< Use the pattern box for Camera adjustment >
Turn on the power supply in the pattern box.
Afterwards, wait for about ten minutes so that the source of
light may stabilize.
(1) Brightness:
160 ± 5cd/m 2 (with LB140 filter)
No chart, center of pattern box
Minolta brightness meter LS-110 or equivalent
* Calibration method
Place the filter (LB140) against the pattern box. With the
filter (LB140) in contact with the brightness meter, adjust
the pattern box brightness to 160 ± 5cd/m
2 .
(2) Color temperature:aa
6100 ± 50K (with LB140 filter)
No chart, center of pattern box
Minolta color meter IIIF or equivalent
* Calibration method
Place the filter (LB140) against the pattern box. With the
filter (LB140) in contact with the color temperature meter,
adjust the pattern box color temperature to 6100 ± 50K.
<Calibration method of pattern box>
LB140
Pattern BOX
(All white)