FujiFilm FinePix F30, Service Manual

Page: 56 / 111

56
4. Adjustments
FinePix F30 Service Manual
<Step 4>
—> The [Firmware version check] screen appears.
<Step 5>
—> The [Adjustment Items Select] screen appears.
<Note>
(1) [F1] Battery Adjustment cannot be run unless the FxF30 Battery jig is used to supply power to the camera.
(2) When new MAIN PWB ASSY is replaced, MAIN PWB ASSY is automatically initialized. At that time, wait for one-two
minutes, and advance the adjustment according to the instruction of the adjustment software.
FinePix F30 Jig Mode Setup Screen
1. Set the Jig mode by using [FxF30 Battery jig (3.7V)].
2. Set the Jig mode by using [Power cable jig (5V)].
1) Set the mode to the Photography mode.
2) Open the Battery cover.
3) Connect the USB cable.
4) Supply power to the camera using the jig
as appropriate for the adjustment details.
5) Switch camera power ON while pressing the shutter button.
6) Ensure that the Led is lit.
When steps 1 to 6 are complete, press the [Enter] key on the PC.
<Fig. 4-7-3>
FirmWare = 1.76
Vendor Name =FUJIFILM
Manufacturer =FUJIFILM
ProductName =FinePix F30
Device Type
=CAMERA
SerialNo =592D3130393706042479311300000E
Frame Work =1.00
Please download a new version if it is necessary
to download the firmware.
Advance to the adjustment item selection screen
when press the [Enter] Key of PC.
<Fig. 4-7-4>